Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)33 · Restraint systems
33 · Body & interior

Airbag module - passenger - deployment (page 2 of 2)

Make
Land Rover
Model
Discovery II (UK)
Section
Repairs
Restraint systemsAirbag module - passenger - deployment · page 2 of 2
  1. Ensure airbag module mounting brackets are secure.
Ensure airbag module mounting brackets are secure.
  1. Press both operating buttons to deploy airbag
  2. DO NOT return to airbag module for 30
  3. Using gloves and face mask, remove airbag
  4. Wipe down tool with damp cloth.
  5. Transport deployed airbag module to
  6. Connect flylead SMD 4082/5 to airbag module.

WARNING: Ensure the deployment tool is not connected to the battery.

  1. Connect flylead SMD 4082/5 to tool SMD 4082/ 1.
  2. Connect tool SMD 4082/1 to battery.

WARNING: Ensure all personnel are at least 15 metres (50 ft) away from the airbag module.

Connect tool SMD 4082/1 to battery.

module.

minutes.

module from tool, place airbag module in plastic bag and seal bag.

designated area for incineration. NOTE: DO NOT re-use or salvage any parts of the airbag system.Do not transport deployed SRS components in the vehicle passenger compartment.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.