Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 2 of 2
NoGo to the next step.
2Is a rumbling or grinding noise present?YesInspect for the followings:
• Drive belt tension
• P/S fluid level
NoGo to the next step.
3Is a rattling noise present?YesInspect rattling location for loose parts.
NoGo to the next step.
4Is a hissing noise present?YesInspect for the following:
• Vacuum leakage
• Spark plug looseness
• Intake-air system leakage
NoGo to the next step.
5Is a rapping or roar noise present?YesInspect looseness for followings:
• Dynamic dumper
• Intake-air system
• Exhaust system
NoGo to the next step.
6Is a knocking noise present?YesGo to symptom troubleshooting "No.13
Knocking/pinging". (See NO.13
KNOCKING/PINGING- ACCELERATION/CRUISE
[LF] .)
NoIf the noise comes from the engine internal, inspect for friction gear, timing chain or
MLA noise.

7

  • Verify test results.
  • If normal, return to diagnostic index to service any additional symptoms.

(See ENGINE SYMPTOM TROUBLESHOOTING [LF] .)

  • If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
  • If vehicle is repaired, troubleshooting completed.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.