Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 2 of 2
If the CPP PID is not normal:
If the CPP/PNP PID is not normal:
If the TR PID is not normal:
• Inspect clutch position switch and related wiring harness for vibration or intermittent open/short circuit.
• Inspect neutral position switch and related wiring harness for vibration or intermittent open/short circuit.
• Inspect TR switch and related wiring harness for vibration or intermittent open/short circuit.
4Connect the M-MDS or equivalent to the DLC-2.
Start the engine and idle it.
Retrieve any DTCs for
EHPAS.
Is there any EHPAS DTC displayed?
YesDTC is displayed:
Go to appropriate DTC inspection.
NoNo DTC is displayed:
Go to the next step.
YesRepair or replace parts if necessary.
5
Is there air leakage felt or
heard at intake-air system

components while racing

No

Inspect the following:

engine to higher speed?

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.