Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)23 · Manual gearbox - R380
23 · Transmission

Reassembly

Make
Land Rover
Model
Discovery II (UK)
Section
Overhaul › Reassembly
Manual gearbox - R380Reassembly
  1. Fit longest bolt and washer ensuring end of bias spring is under washer, tighten bolt to 25 Housing - clutch Nm (18 lbf.ft).
  2. Repeat above procedures for remaining bias

$% 37.12.07 spring.

  1. Fit gear selector housing.

Disassembly MANUAL GEARBOX - R380, OVERHAUL, Housing - gear selector mechanism.

  1. Adjust gear lever bias springs. MANUAL GEARBOX - R380, ADJUSTMENTS, Spring - gear lever bias.

Reassembly

  1. Remove clutch release bearing and operating lever.
Reassembly – Remove clutch release bearing and operating lever.
  1. Remove 6 bolts and remove clutch housing.
  2. Clean clutch housing and gearbox mating face.
  3. Position clutch housing and tighten bolts to 75 Nm (55 lbf.ft).
  4. Fit clutch operating lever and release bearing.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.