Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)24 · Transfer box - LT230SE
24 · General

Reassembly (page 6 of 9)

Make
Land Rover
Model
Discovery II (UK)
Section
Overhaul
Transfer box - LT230SEReassembly · page 6 of 9
Diagram
  1. Note position of shoulder bolt, remove 6 bolts and remove rear output shaft housing.
  2. Remove rear bearing track from main casing.
Remove rear bearing track from main casing.
  1. Secure differential in a soft jawed vice.
  2. Release staking from bearing retaining nut.
  3. Using tool LRT-41-007 remove and discard bearing retaining nut.
Using tool LRT-41-007 remove and discard bearing retaining nut.
  1. Position tool LRT-99-002 to vice.
  2. Position tool LRT-41-001 around rear differential bearing, position differential to tool LRT-99-002 and press off bearing.
Position tool LRT-41-001 around rear differential bearing, position differential to tool L
  1. Remove high range gear and bush.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.