Range Rover P38
ELECTRICAL
3
REPAIR
ALTERNATOR DRIVE BELT - DIESEL
Service repair no - 86.10.03
Remove
1. Disconnect battery negative lead.
2. Remove air conditioning compressor drive belt,
See AIR CONDITIONING, Repair.
3. Remove 3 bolts securing upper fan cowl.
Remove fan cowl.
4. Release belt tension using a suitable lever
beneath tensioner damper as shown.
5. Release belt from pulleys. Withdraw belt from
between cooling fan and cowl.
Refit
6. Ensure belt surfaces of pulleys are clean.
7. Thread belt between cooling fan and cowl.
8. Route belt around pulleys as shown.
9. Finally, lever tensioner to slack position. Engage
belt over alternator pulley.
10. Position upper fan cowl. Secure with bolts.
11. Fit air conditioning compressor drive belt.
See
AIR CONDITIONING, Repair. Reconnect
battery negative lead.