Range Rover P38
ELECTRICAL
9
REPAIR
6. Remove 2 bolts securing starter motor to engine.
NOTE: Use two extensions as illustrated to
gain access to the top bolt.
7. Remove starter motor.
Refit
8. Ensure mating faces are clean.
9. Fit starter motor.
10. Fit bolts. Tighten to
45 Nm. (33 lbf.ft)
11. Fit Lucar to starter solenoid.
12. Connect feed wires to solenoid terminal. Secure
with nut.
13. Remove stands and lower vehicle.
14. Reconnect battery negative lead.
STARTER MOTOR - V8 - 97 MY ON
Service repair no - 86.60.01
Remove
1. Disconnect battery earth lead.
2. Raise front of vehicle.
WARNING: Support on safety stands.
3. Remove gearbox RH acoustic cover.
See
CHASSIS AND BODY, Repair.
4. Remove nut securing 2 cables to starter solenoid
and position cables aside.
5. Disconnect lucar from starter solenoid.
6. Remove 2 bolts securing starter motor to engine.