Range Rover P38
86
ELECTRICAL
NEW RANGE ROVER
2
REPAIR
ALTERNATOR DRIVE BELT - V8 - FROM 99MY
Service repair no - 86.10.03
Remove
1. Remove cooling fan.
See COOLING SYSTEM,
Repair.
2. Remove 2 bolts securing auxiliary drive belt
cover, remove cover and collect spacers.
3. Release drive belt tensioner using a 15 mm ring
spanner and remove belt from pulleys.
Refit
4. Clean drive belt pulley grooves and ensure
grooves are not damaged.
5. Fit new drive belt around pulleys, ensure belt is
correctly aligned in pulley grooves.
6. With assistance, hold tensioner fully clockwise
and fit drive belt around remaining pulley.
7. Fit auxiliary drive belt cover and spacers and
secure with bolts.
8. Fit cooling fan.
See COOLING SYSTEM,
Repair.