Range Rover P38
ELECTRICAL
5
REPAIR
ALTERNATOR - V8 - FROM 99MY
Service repair no - 86.10.02
Remove
1. Remove alternator drive belt.
See this section.
2. Remove 2 bolts securing alternator to mounting
bracket.
3. Release alternator from mounting bracket.
4. Remove nuts securing alternator cables, and
release cables.
5. Remove alternator from mounting bracket.
Refit
6. Position alternator to mounting bracket.
7. Connect alternator cables, fit nuts and tighten B+
nut to
18 Nm (13 lbf.ft) max. D+ nut to
5 Nm (3.5 lbf.ft) max. B+ and D+ are marked on
the rear of the alternator, adjacent to each cable
connection.
8. Locate alternator in mounting bracket.
9. Fit bolts and tighten to
45 Nm (33 lbf.ft).
10. Fit alternator drive belt.
See this section.