Range Rover P38
86
ELECTRICAL
NEW RANGE ROVER
16
REPAIR
5. Remove 2 screws securing solenoid to mounting
plate. Remove solenoid.
6. Release clip. Remove operating rod from
solenoid.
Refit
7. Reverse removal procedure.
BODY ELECTRICAL CONTROL MODULE (BeCM)
Service repair no - 86.55.98
Remove
1. Disconnect battery negative lead.
2. Remove RH front seat for access.
See SEATS,
Repair.
3. Remove 2 screws securing heater rear outlet
duct. Remove duct.
4. Release carpet over BeCM. Position aside.
5. Remove 2 nuts and screw securing BeCM to
mounting.
6. Disconnect multiplugs from BeCM.
7. Release terminal covers.
8. Disconnect 1 earth and 3 feed wires.
9. Remove BeCM.
Refit
10. Reverse removal procedure.