Range Rover P38
86
ELECTRICAL
NEW RANGE ROVER
42
REPAIR
3. Release bulb holder from lamp.
4. Remove 4 nuts. Remove tail lamp.
Refit
5. Reverse removal procedure.
WINDOW MOTOR - FRONT
Service repair no - 86.25.04
Remove
1. Remove front door glass.
See CHASSIS AND
BODY, Repair.
2. Disconnect multiplug from window lift motor.
3. Remove lower regulator plate retaining bolt.
4. Remove bolt securing regulator runner to door
panel.
5. Slacken 2 upper regulator plate retaining bolts.
6. Slide regulator assembly rearwards. Release
from upper retaining bolts.
7. Remove regulator assembly.
8. Remove 3 screws securing window lift motor.
9. Remove window lift motor from regulator.
Refit
10. Fit window lift motor to regulator. Secure with
screws.
11. Fit regulator assembly.
12. Position regulator plate to upper retaining bolts.
Slide regulator forwards. Tighten bolts.
13. Secure regulator runner to door panel with bolt.
NOTE: Position runner midway in its slot.
14. Fit lower regulator plate retaining bolt.
15. Reconnect window lift motor multiplug.
16. Refit front door glass.
See CHASSIS AND
BODY, Repair.