Range Rover P38
86
ELECTRICAL
NEW RANGE ROVER
4
REPAIR
ALTERNATOR - V8 - UP TO 99MY
Service repair no - 86.10.02
Remove
1. Disconnect battery negative lead.
2. Remove alternator drive belt.
See this section.
3. Remove 2 bolts securing alternator to mounting
bracket.
4. Release alternator from mounting bracket to gain
access to terminal cover.
5. Remove terminal cover.
6. Remove 2 nuts securing leads to alternator
terminals. Remove leads.
7. Remove alternator.
Do not carry out further dismantling if
component is removed for access only.
8. Restrain shaft using an Allen key. Remove
pulley nut. Remove pulley.
9. Ensure shaft and pulley are clean.
10. Position pulley. Secure with nut. Tighten to
40 Nm. (30 lbf.ft)
Refit
11. Position alternator.
12. Fit 2 leads to alternator. Secure with nuts. Fit
terminal cover.
13. Align alternator to mounting bracket. Secure with
bolts. Tighten to
25 Nm. (18 lbf.ft)
14. Fit alternator drive belt.
See this section.
15. Reconnect battery negative lead.