Range Rover P38
86
ELECTRICAL
NEW RANGE ROVER
8
REPAIR
DRIVE BELT TENSIONER - DIESEL
Service repair no - 86.10.06
Remove
1. Disconnect battery negative lead.
2. Remove drive belt.
See this section.
3. Remove bolts securing tensioner to pulley
bracket and fulcrum.
4. Remove tensioner.
CAUTION: The tensioner is an oil filled
damper which must be stored vertically.
An incorrectly stored damper must be bled
before fitment by compressing several times.
Refit
5. Reverse removal procedure.
STARTER MOTOR - V8
Service repair no - 86.60.01
Remove
1. Disconnect battery negative lead.
2. Raise the vehicle.
WARNING: Support on safety stands.
3. Remove nut securing feed wires to starter
solenoid.
4. Remove 2 feed wires from solenoid terminal.
5. Release Lucar from solenoid.