Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)24 · Brakes
24 · Brakes

Rear brake drum

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Rear brake drum
BrakesRear brake drum · page 1 of 2

REAR BRAKE DRUM

Service repair no - 70.10.03

Remove

  1. Raise rear of vehicle.

WARNING: Support on safety stands.

  1. Remove road wheel(s).
  2. Release handbrake.
Rear brake drum – Release handbrake.
  1. Remove 2 screws securing brake drum.
  2. Screw 2 screws into drum, tighten equally to ease drum from hub.

CAUTION: If drum is held, release the shoes to increase clearance as follows:

Rear brake drum – Screw 2 screws into drum, tighten equally to ease drum from hub.
  1. Remove rubber grommet from rear of backplate.
  2. Using a flat screwdriver, disengage handbrake lever stop to increase shoe to drum clearance. If drum is still held, loosen handbrake cable adjustment. See Adjustments.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.