Workshop Manuals Factory service & repair Rover
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement08 · Engine management system - MEMS
08 · Engine

Engine coolant temperature (ect) sensor

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
Section
Repairs › Engine coolant temperature (ect) sensor
Engine management system - MEMSEngine coolant temperature (ect) sensor

ENGINE COOLANT TEMPERATURE (ECT) SENSOR

Service repair no - 18.30.10

Remove

  1. Disconnect battery earth lead.
Engine coolant temperature (ect) sensor – Disconnect battery earth lead.
  1. Disconnect multiplug from ECT sensor.
  2. Position container to collect spillage.
  3. Remove ECT sensor.

Refit

  1. Clean threads of ECT sensor.
  2. Apply Loctite 577 to threads of ECT sensor.
  3. Fit ECT sensor and tighten to 15 Nm.
  4. Connect multiplug to ECT sensor.
  5. Connect battery earth lead.
  6. Top-up coolant. See MAINTENANCE.

CRANKSHAFT POSITION (CKP) SENSOR

Service repair no - 18.30.12

Remove

Crankshaft position (ckp) sensor – Service repair no - 18.30.12
  1. Disconnect multiplug from CKP sensor.
  2. Remove bolt securing CKP sensor to flywheel housing.
  3. Remove CKP sensor.

Refit

  1. Clean CKP sensor and mating face on flywheel housing.
  2. Position CKP sensor, fit bolt and tighten to 6 Nm.
  3. Connect multiplug to CKP sensor.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.