REPAIRS, Trim casing - upper - 'B' post.

11. Position rear interior lamp to headlining and

12. Fit rear interior lamp to headlining.
13. Models with rear A/C:
14. Models with volumetric alarm:
15. Fit grab handles to headlining and secure with
16. Fit end caps to grab handles.
17. Fit front sunroof aperture trim.
18. Fit rear sunroof aperture trim.
19. Fit tail door aperture upper trim casing.
20. Fit sun visor clips to headlining and secure with
21. Fit caps to sun visor clips.
22. Position front stowage pocket to headlining and
23. Fit and tighten 10 screws securing front
24. Connect multiplug to front interior lamp.
25. Fit front interior lamp to headlining and secure
26. Fit lens to front interior lamp.
27. Fit and tighten screw securing front stowage
28. Fit access panel to front edge of front stowage
38. Remove 7 nuts securing each stowage pocket to headlining and collect mounting plates.
29. Position sun visor to headlining and secure to
39. Remove both pockets from headlining.
40. Remove 8 screws securing rear console to
30. Connect multiplug to sun visor.

headlining and collect 3 mounting plates.

31. Fit and tighten screws securing sun visor to
41. Remove rear console from headlining.
32. Repeat process for second sun visor.

Refit

33. Models with premium ICE:
1. Fit rear console and mounting plates to headlining.
2. Fit and tighten nuts securing rear console to
34. Fit both trim casings to 'A' posts and secure

headlining.

3. Fit both stowage pockets and mounting plates
35. Fit both 'B' post upper trim casings.

to headlining.

4. Fit and tighten nuts securing stowage pockets to headlining.
36. Fit both 'D' post trim casings.
5. Models with rear A/C: a Fit 3 central air vents to headlining. b Fit 2 rear air vents to headlining. c Fit foam pads to air vents.
6. With assistance, position headlining in vehicle.
7. Fit and tighten screw securing centre of headlining to roof.
8. Connect multiplug to rear sunroof switch.
9. Fit rear sunroof switch to rear console.
10. Fit clips securing rear edge of headlining to sunroof.

connect multiplug.

a Position rear A/C control panel to headlining and connect multiplugs and Lucar connectors. b Fit rear A/C control panel to headlining. Connect multiplug to front volumetric sensor and fit sensor to headlining.

bolts.

screws.

connect multiplugs to sunroof switches.

stowage pocket to headlining.

with nuts.

pocket to headlining.

pocket.

clip.

headlining.

Position both 'A' post trim casings and connect multiplugs to speakers.

with clips.

INTERIOR TRIM COMPONENTS,

REPAIRS, Trim casing - upper - 'B' post.

INTERIOR TRIM COMPONENTS,

REPAIRS, Trim casing - 'D' post.