Workshop Manuals Factory service & repair Mini
01 Introduction02 General information03 Information04 Engine05 Emission control06 Engine management system - MEMS07 Fuel delivery system08 Cooling system09 Manifold & exhaust systems10 Clutch11 Manual gearbox12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Wipers & washers20 Electrical21 Instruments
Mini Mini Workshop Manual (1996-2000)20 · Electrical
20 · Electrical

Cd player

Make
Mini
Model
Mini Workshop Manual
Year
1996–2000
Section
Repairs › Cd player
ElectricalCd player

CD PLAYER

Remove

  1. Disconnect battery earth lead.
Cd player – Disconnect battery earth lead.
  1. Release access tab from each side of unit.
  2. Using a 2.5 mm Allen key, slacken 2 captive screws securing unit.
Cd player – Using a 2.5 mm Allen key, slacken 2 captive screws securing unit.
  1. Withdraw unit sufficiently to gain access to multiplugs and aerial lead.

CAUTION: Take care not to damage face of unit.

  1. Noting their fitted positions, disconnect 2 multiplugs and aerial lead plug; remove unit.

Refit

  1. Position unit, connect multiplugs and aerial lead plug.
  2. Fit unit, tighten 2 captive screws.
  3. Secure access tab to each side of unit.
  4. Connect battery earth lead.
  5. Enter security code and check unit for correct operation.

Parts & tools for this job For 1996 Mini Mini

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.