Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition16 · Body
16 · Body & interior

Seat cushion cover removal

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Interior fittings › Seat cushion cover removal
BodySeat cushion cover removal · page 1 of 2

Seat cushion cover removal

Diagram showing the underside of a seat cushion frame with hook locations indicated by shading, labeled A.
  • Shaded areas indicate hook locations.

CAUTION: Wear gloves to remove and install the seat cover.

  1. Remove the rear seat cushion and seat-back.
  2. Remove all hooks of the seat cushion and seat-back covers.
  3. Pull back the edge of the seat covers all the way around, then release the clips.
Diagram showing the rear seat cushion with the cover partially removed, exposing the internal structure and pad, labeled B.
Detailed diagram illustrating the removal of a seat cover clip using upholstery ring pliers, with labels C through H.

76M 0927

  • A Seat cushion cover
  • B Pad
  • C New clip
  • D Seat cover
  • E Upholstery ring pliers
  • F Pad
  • G Wire (Pad side)
  • H Rod (Cover side)

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.