22 · Diagnostics

City warning light on

Fault diagnosisCity warning light on

CITY WARNING LIGHT ON

1.2 8v, 1.3 Multijet, 1.4 16v

After the initial test, the CITY warning light on the Instrument Panel Node remains on.

1	PRELIMINARY CHECK	All OK	Problems encountered	Operation
		Test results
	Press the button repeatedly to check whether the LED in the button changes status	Move on to Step 2	The LED in the button does not change status	Move on to Step 4
2	CHECK USING THE EXAMINER	All OK	Problems encountered	Operation
	Using the Examiner connect to the CAN information and check that there are no faulty control units	Move on to Step 3	Faulty control units present	Continue as instructed by the diagnostic equipment
3	ACTIVE DIAGNOSIS CHECK	All OK	Problems encountered	Operation
	With the Examiner in the Instrument Panel Node ambient check that the CITY warning light is correctly activated/deactivated in Active Diagnosis	Move on to Step 4	The warning light does not flash	Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R
4	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	Check that the CITY button is working properly Check the wiring between the CITY button and the Body Computer See E7045 ELECTRIC STEERING	End of diagnosis	1. CITY button defective 2. Wiring insulation defective	1. Replace the control panel in the dashboard Op. 7040A56 SWITCH UNIT IN DASHBOARD - R.R. 2. Restore correct wiring

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.