Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)22 · Fault diagnosis
22 · Diagnostics

Display does not show outside temperature

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Instrument panel › Display does not show outside temperature
Fault diagnosisDisplay does not show outside temperature

DISPLAY DOES NOT SHOW OUTSIDE TEMPERATURE

1.2 8v, 1.3 Multijet, 1.4 16v

With the key on the display does not show the outside temperature.

Test results
1ELECTRICAL CIRCUIT CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check that the connections between the outside temperature and the Body Computer are correct.

Check that the outside temperature sensor is working properly

Move on to Step 2

1.Connections defective

2.Temperature sensor defective

1.Restore the correct connections, if necessary, replace the wiring:

See E6020 AIR CONDITIONING

2.Replace the temperature sensor

2DISPLAY OPERATION CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the display is working properlyEnd of diagnosisDisplay defective

Replace the Instrument Panel

Op. 5560B10 CONTROL PANEL - R+R

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.