Mil warning light on (engine does not start)
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Instrument panel › Mil warning light on (engine does not start)
‹ Prev Mil warning light flashingNext › Mil warning light and warning light/symbol for vehicle protection system both on (engine does not start)
Fault diagnosisMil warning light on (engine does not start)
MIL WARNING LIGHT ON (ENGINE DOES NOT START)
The engine control unit warning light stays on. The CODE warning light goes on and off.
N.B.: If the CODE warning light goes off, this means that the communication between both control units has been successful.
| Test results | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the diagnostic test equipment (Examiner or other instruments) to the tester input. Check for errors saved in the control unit. | Move on to Step 2 | Error detected in the control unit | Proceed as instructed by the diagnostic tester | |
| 2 | CORRECT OPERATION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Continue as instructed in the See table B010 ENGINE DOES NOT START (UNDER ANY CIRCUMSTANCES) | |
‹ Prev Mil warning light flashingNext › Mil warning light and warning light/symbol for vehicle protection system both on (engine does not start)
Parts & tools for this job For 2007 Fiat 500
- PARTEngine gasket setSearch: Fiat 500 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.