Control panel poorly lit / not lit
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Instrument panel › Control panel poorly lit / not lit
‹ Prev Instrument panel not workingNext › Mil warning light not working (remains off before starting)
Fault diagnosisControl panel poorly lit / not lit
CONTROL PANEL POORLY LIT / NOT LIT
| Test results | ||||
| 1 | ELECTRICAL POWER SUPPLY CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Check that the electrical power supply for the Instrument Panel Node is correct by carrying out the | Move on to Step 2 | Fault in positive electrical supply and/or earth | Replace defective component (in the case of a fuse, find out what caused it to blow) | |
| 2 | ELECTRICAL CONNECTIONS CHECK | All OK | Problems encountered | Operation |
Check the wiring between the Body Computer and the Instrument Panel. In particular, check that each individual pin is properly connected | Move on to Step 3 | Electrical connections not operational | Renew the damaged electrical connections | |
| 3 | ACTIVE DIAGNOSIS CHECK | All OK | Problems encountered | Operation |
| With the Examiner in Instrument Panel Node mode, check that the instrument panel light is correctly activated in Active Diagnosis | End of diagnosis | The panel lighting does not activate | Replace the Instrument Panel | |
‹ Prev Instrument panel not workingNext › Mil warning light not working (remains off before starting)
Parts & tools for this job For 2007 Fiat 500
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat 500
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.