22 · Diagnostics

Trip meter does not zero

Fault diagnosisTrip meter does not zero

TRIP METER DOES NOT ZERO

1.2 8v, 1.3 Multijet, 1.4 16v

With the key on, the trip meter does not zero when the TRIP button on the right-hand steering wheel interface lever is operated.

1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
		Test results
	Connect the Examiner diagnostic equipment to the diagnostic socket. Check that there are no faults in the Instrument panel	Move on to Step 2	Presence of errors	Continue following the instructions for the diagnostic equipment
2	ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check: Connections between right steering column switch unit lever and instrument panel Connections between right steering column switch unit lever and earth See E4010 INSTRUMENT PANEL	Move on to Step 3	Connections defective, earth or power supply defective	Restore the correct connections; if necessary, replace the wiring.
3	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the TRIP button on the right-hand steering wheel interface lever is working properly See E4010 INSTRUMENT PANEL	End of diagnosis	Right lever defective	Replace the steering column switch unit Op. 5550A10 STALK UNIT ASSEMBLY - R+R

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.