Workshop Manuals Factory service & repair Fiat
Fiat 500 Factory Service Manual (2007-2024)22 · Fault diagnosis
22 · Diagnostics

Clock not working

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Instrument panel › Clock not working
Fault diagnosisClock not working

CLOCK NOT WORKING

1.2 8v, 1.3 Multijet, 1.4 16v

With the ignition on, the display either does not show the time or it is not correct.

Test results
1INSTRUMENT PANEL FUNCTIONS CHECKAll OKProblems encounteredOperation

Check:

  • That the display shows the correct time
  • That it is possible to adjust the time
  • That the clock moves forward
End of diagnosis

1. The time displayed is not correct

2. It is not possible to adjust the time

3. The clock stays still

1. Set the correct time

2. Move on to Step 2

3. Move on to Step 3

2CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation

Connect the Examiner diagnostic equipment to the diagnostic socket.

Check that there are no faults in the instrument panel

Move on to Step 3Presence of errorsContinue following the instructions for the diagnostic equipment
3CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Keeping the Examiner equipment connected to the diagnostic socket, check the operation of the display in active diagnosis.End of diagnosisDisplay defective

Replace the instrument panel

Op. 5560B10 CONTROL PANEL - R+R

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.