Electric power assisted steering fault display

Fault diagnosisElectric power assisted steering fault display

ELECTRIC POWER ASSISTED STEERING FAULT DISPLAY

1.2 8v, 1.3 Multijet, 1.4 16v

The electric steering node comunicates fault messages to the instrument panel node via the C-CAN and through the gateway at the B-CAN

1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
		Test results
	Connect the diagnosis equipment and check there are no faults at the Electric Steering Node	Move on to Step 2	Presence of faults	Continue as instructed by the diagnostic equipment.
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diganostic equipment to the electric steering control unit and check: in active diagnosis that the warning light is working properly	Move on to Step 3	The warning light does not flash	Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R
3	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the body computer is working properly	End of diagnosis	Body Computer defective	Replace Body Computer Op. 5505A32 BODY COMPUTER - R.R

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.