Display does not show headlamp alignment data
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Instrument panel › Display does not show headlamp alignment data
‹ Prev Display module no signal - to check panelNext › Electric power assisted steering fault display
Fault diagnosisDisplay does not show headlamp alignment data
DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA
When the buttons which control the headlamp alignment are operated (with the dipped headlamps on) the information on the display does not change.
If the headlamp alignment adjustment is not working, see above.
See table I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING
| Test results | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner) to the diagnostic socket and check that all the display segments are working properly at the Instrument Panel in active diagnosis | Move on to Step 2 | One or more segments not working | Replace the instrument panel | |
‹ Prev Display module no signal - to check panelNext › Electric power assisted steering fault display
Parts & tools for this job For 2007 Fiat 500
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.