Display module no signal - to check panel
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Instrument panel › Display module no signal - to check panel
‹ Prev Mil warning light stays on (engine starts)Next › Display does not show headlamp alignment data
Fault diagnosisDisplay module no signal - to check panel
DISPLAY MODULE NO SIGNAL - TO CHECK PANEL
The display module is turned on by the panel at key on and displays information for the user
| Test results | ||||
| 1 | CHECK USING THE EXAMINER | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Connect an Examiner and check in CAN Information that there are no control units in error | Move on to Step 2 | Control unit faulty | Continue as instructed by the diagnostic equipment | |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Connect the diagnostic equipment and check the operation of the display segments at the INSTRUMENT PANEL NODE by activating the Autotest function in active diagnosis | End of diagnosis | One or more segments do not come on | Replace the Instrument Panel | |
‹ Prev Mil warning light stays on (engine starts)Next › Display does not show headlamp alignment data
Parts & tools for this job For 2007 Fiat 500
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.