22 · Diagnostics

Milometer not working

Fault diagnosisMilometer not working

MILOMETER NOT WORKING

1.2 8v, 1.3 Multijet, 1.4 16v

While driving, the milometer does not work or works irregularly; the speedometer works normally.

If the speedometer is also not working properly

the mileage message is provided by the Body Computer Node using the signals coming from the Brake Node.

0	PRELIMINARY CHECK	All OK	Problems encountered	Operation
		Test results
	With the engine started, check that no failure message is displayed	Move on to Step 2	Faults found	Move on to Step 1
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic test equipment (Examiner) to the Body Computer. Check the following at the CAN: no control unit inactive; that there are no faulty control units; no control unit with faulty CAN line	Move on to Step 2	Faults on CAN network	Continue following the instructions on the diagnostic equipment
		Move on to Step 2	Errors on instrument panel node	Move on to Step 2
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the Examiner diagnostic equipment to the diagnostic socket or keep it connected and check that there are no faults at the instrument panel node	Move on to Step 3	Presence of errors or failed dialogue with the diagnostic equipment	Continue following the instructions on the diagnostic equipment
3	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Keeping the Examiner equipment connected to the diagnostic socket, check the operation of the display in active diagnosis	End of diagnosis	Milometer not working	Replace the instrument panel Op. 5560B11

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.