Freelander Service Procedures
INTERMEDIATE REDUCTION DRIVE
41-14
REPAIRS
Gasket - end cover - IRD housing - Td4
$% 41.27.05
Remove
1. Drain fluid from IRD.
DRIVE, ADJUSTMENTS, Intermediate
reduction drive (IRD) fluid - drain & refill -
Non NAS.
2. Remove drive shaft RH seal.
DRIVE, REPAIRS, Seal - driveshaft - RH.
3. Remove nut securing manifold heat shield to
IRD unit.
4. Remove nut securing heat shield to IRD pinion
housing.
5. Remove 2 bolts securing heat shield and
remove heat shield.
6. Remove lower engine steady.
7. Remove 3 bolts securing IRD support bracket
to sump.
8. Remove 2 bolts securing support bracket to
IRD and remove bracket.
9. Remove 3 bolts, securing IRD upper support
bracket to cylinder block.
10. Remove 2 bolts securing upper support bracket
to IRD and remove bracket.
11. Remove 8 bolts securing end cover to main
case of IRD.
12. Remove end cover.