Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)10 · Engine management system - MEMS
10 · Engine

Cruise control operating switch - ’t’ series

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Cruise control operating switch - ’t’ series
Engine management system - MEMSCruise control operating switch - ’t’ series

CRUISE CONTROL OPERATING SWITCH - ’T’ SERIES

Service repair no - 19.75.30

Remove

Cruise control operating switch - ’t’ series – Service repair no - 19.75.30
  1. Using a small flat ended screwdriver release switch from instrument surround.
  2. Disconnect multiplug from switch and remove switch.

Refit

  1. Position switch to instrument surround, connect multiplug and secure switch.

CRUISE CONTROL SET/RESUME SWITCH - ’T’ SERIES

Service repair no - 19.75.33

Remove

  1. Remove both horn push switches. See ELECTRICAL, Repairs.
Cruise control set/resume switch - ’t’ series – Remove both horn push switches. See ELECTRICAL, Repairs.
  1. Remove 2 screws securing switch to steering wheel.
  2. Release switch from steering wheel.
  3. Remove switch and harness from steering wheel.

Refit

  1. Fit harness to steering wheel and position switch to steering wheel.
  2. Fit and tighten screws securing switch to steering wheel.
  3. Fit both horn push switches. See ELECTRICAL, Repairs.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.