Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition16 · Body
16 · Body & interior

Side Window and Rear Quarter Moulding

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Exterior fittings › Side Window and Rear Quarter Moulding
BodySide Window and Rear Quarter Moulding

● Broken circles indicate location and quantity of side moulding clips.

● Take care not to damage the upper mouldings of the windshield and rear window.

● To ease installation apply warm soapy water to the moulding.

Side Window and Rear Quarter Moulding

  1. Remove the screw and pull off the side window moulding by hand.
  2. Remove the screws (4) from the rear quarter moulding and release moulding lower clip from the body.

Note:

  • Take care not to bend the roof moulding, side moulding or scratch the body.
  • If necessary, replace any damaged clips.
  1. Installation is the reverse of the removal procedure.
Blank diagram area marked F1

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.