Workshop Manuals Factory service & repair Rover
Rover 800 Workshop Manual (1996-1999)21 · Restraint systems
21 · Body & interior

Deployment with module removed from vehicle.

Make
Rover
Model
800 Workshop Manual
Year
1996–1999
Section
Precautions › Deployment with module removed from vehicle.
Restraint systemsDeployment with module removed from vehicle. · page 1 of 2

Deployment with module removed from vehicle.

These guidelines are written to aid authorised personnel to carry out the safe disposal of airbag modules when removed from the vehicle.

WARNING:

Only use the Rover approved deployment equipment. Deploy airbag modules in a well ventilated designated area. Ensure airbag module is not damaged or ruptured before deploying.

Driver’s airbag module

  1. Carry out deployment tool self test.
  2. Remove airbag module from steering wheel. See Repairs.
Driver’s airbag module – Remove airbag module from steering wheel. See Repairs.
  1. Position tool SMD 4082/2 in vice, ensuring that vice jaws grip tool above bottom flange to prevent possibility of tool being forced upwards from vice. Tighten vice.
Driver’s airbag module – Position tool SMD 4082/2 in vice, ensuring that vice jaws grip tool above bottom flange to
  1. Secure airbag module to tool SMD 4082/2 . Ensure module is correctly secured using both fixings.
  2. Ensure airbag module mounting brackets are secure.

Parts & tools for this job For 1996 Rover 800

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.