Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)41 · Panel repairs
41 · General

Front bulkhead assembly (page 2 of 2)

Make
Land Rover
Model
Discovery II (UK)
Section
Repairs
Panel repairsFront bulkhead assembly · page 2 of 2
  1. Fit front wing. EXTERIOR FITTINGS, REPAIRS, Bonnet locking platform Wing - front - up to 03MY.
  2. Connect leads/multiplug to alternator.
  3. Connect battery leads, negative lead last. Remove
  4. Remove battery tray.
  5. Remove air filter assembly.
  6. Remove RH horn.
  7. Remove bonnet release cable.
  8. Support bonnet in open position
  9. Remove bonnet locking mechanism.
  10. Remove VIN plate.
  11. Remove centre braces.
  12. Disconnect both battery leads, negative lead first.
  13. Disconnect leads/multiplug from alternator.
  14. Remove front bumper assembly. EXTERIOR FITTINGS, REPAIRS, Bumper assembly - front.
  15. Models with A/C: Remove condensor. AIR CONDITIONING, REPAIRS, Condenser.
  16. Diesel models: Remove gearbox fluid cooler.
  17. Remove RH and LH headlamps. LIGHTING, REPAIRS, Headlamp - up to 03MY.
  18. Remove RH and LH repeater lamps. LIGHTING, REPAIRS, Lamp - front repeater.
  19. Release headlamp wiring and position aside.
  20. Remove battery. CHARGING AND STARTING, REPAIRS, Battery.

ENGINE MANAGEMENT SYSTEM - Td5, REPAIRS, Air filter assembly. ENGINE MANAGEMENT SYSTEM - V8, REPAIRS, Air cleaner assembly.

ALARM SYSTEM AND HORN, REPAIR, Vehicle horn.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.