Discovery II
PANEL REPAIRS
REPAIRS 77-2-39
16. Fit sill finisher.
17. Fit rear door.
18. Fit front door.
19. Fit front wing.
20. Connect leads/multiplug to alternator.
21. Connect battery leads, negative lead last.
Sill inner assembly
NOTE: In this procedure, the sill outer assembly is
replaced in conjunction with the sill inner assembly.
Remove
1. Disconnect both battery leads, negative lead
first.
2. Disconnect leads/multiplug from alternator.
3. Remove sill outer assembly.
Repair
1. Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
Refit
1. Fit sill outer assembly.
2. Connect leads/multiplug to alternator.
3. Connect battery leads, negative lead last.