Discovery II
PANEL REPAIRS
REPAIRS 77-2-43
Body side inner rear assembly
In this procedure, the panel body side assembly is
replaced in conjunction with the body side inner rear
assembly.
Remove
1. Disconnect battery eath lead.
2. Disconnect leads/multiplug from alternator.
3. Remove panel body side assembly.
4. Remove RH or LH rear seat.
5. Remove loadspace carpet.
6. Remove rear side seat belt.
7. Remove third row seat belt.
8. Remove fuel tank.
9. Remove fuel filler tube.
10. RH side: Remove fuel flap release solenoid.
REPAIRS, Solenoid - fuel filler flap release.
REPAIRS, Solenoid - fuel filler flap release.
11. RH side: Remove air extractor vent.
12. Remove relevant wiring.
Repair
1. Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
Refit
1. Fit and secure wiring.
2. RH side: Fit air extractor vent.
3. RH side: Fit fuel flap release solenoid.
REPAIRS, Solenoid - fuel filler flap release.
REPAIRS, Solenoid - fuel filler flap release.
4. Fit fuel filler tube.
5. Fit fuel tank.
6. Fit third row seat belt.
7. Fit rear side seat belt.
8. Fit loadspace carpet.
9. Fit rear seat.
10. Fit panel body side assembly.
11. Connect leads/multiplug to alternator.
12. Connect battery leads, negative lead last.
M77 1698A