Freelander Service Procedures
AIR CONDITIONING
ADJUSTMENTS
82-3
ADJUSTMENTS
Drive belt - compressor - Td4
$% 82.10.01
Check
1. Disconnect battery earth lead.
2. Remove underbelly panel.
3. Turn steering on RH lock.
4. Remove 3 bolts and RH splash shield.
5. Check condition of drive belt. Renew a drive
belt that shows signs of wear and splitting.
Adjust
1. Loosen clamp and pivot bolts of compressor
drive belt tensioner.
2. Apply an anti-clockwise torque of 38 Nm (28
lbf.ft) for an existing belt and 47 Nm (35 lbf.ft)
for a new belt to tensioner plate hexagon.
3. Tighten tensioner clamp bolt to 24 Nm (18
lbf.ft).
4. Tighten tensioner pivot bolt to 24 Nm (18 lbf.ft).
5. Fit splash shield and tighten bolts to 10 Nm (7.5
lbf.ft).
6. Fit underbelly panel.
7. Connect battery earth lead.
M82 0721