Freelander Service Procedures
BODY DIMENSIONS
BODY GAPS AND PROFILES 77-1-17
BODY GAPS AND PROFILES
Gap and Profile Measurements
The following information is to be used as a guide to assist the technician in refitting exterior body panels and trim
items so as to achieve a correctly aligned vehicle.
Measurements shown are in millimeters and inches. The measurements shown in brackets are in inches.
Gap a - Bonnet to headlamp. Even gaps side to side, tolerance
±
1.0 mm (0.040).
Gap b - Bonnet to bumper overrider. Even gaps side to side, tolerance
±
1.0 mm (0.040).
Gap c - Headlamp to bumper overrider. Visually even gaps within 2.0 mm (0.080).