landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Sealants > < CAPACITIES, FLUIDS, LUBRICANTS AND SEALANTS|Fluids
Page 146
background image

CAPACITIES, FLUIDS, LUBRICANTS AND SEALANTS

09-3

Lubrication

The engine and other lubricating systems are filled 
with high- performance lubricants giving prolonged 
life.

CAUTION: Always use a high quality oil of the 
correct viscosity range in the engine. The use of 
oil of the incorrect specification can lead to high 
oil and fuel consumption and ultimately to 
damaged components.

Oil to the correct specification contains additives 
which disperse the corrosive acids formed by 
combustion and prevent the formation of sludge 
which can block the oil ways. Additional oil additives 
should not be used.

Always adhere to the recommended servicing 
intervals.

Engine oil
Engine oil viscosity / temperature ranges are 
indicated in the following table:

0W/30; 5W/30 

0W/40, 50, 60; 5W/40, 50, 60 

10W/30 

10W/40, 50, 60 

Engine oil – Td4 engine
Use 0W/30 or 5W/40, 50, 10W/30, 40, 60 oil meeting 
ACEA A3/B3 specifications, and having a viscosity 
band recommended for the temperature range of 
your locality. Where oils to these European 
specifications are not available, well known brands of 
oils meeting API SH quality should be used.

Engine oil – K1.8 engine
Use a 10W/40 oil meeting specification ACEA A2 or 
A3. 

Engine oil – KV6 engine – Non NAS models
Use a 10W/40 oil meeting specification ACEA A2 or 
A3. 

Engine oil – KV6 engine - NAS models
Use a 5W/40 fully synthetic oil meeting specification 
ACEA A3. Where oils to these European 
specifications are not available, well known brands of 
oils meeting API SH quality should be used.

Gearbox oil
Use of gearbox oils other than those specified may 
result in serious damage to the gearbox.

Manual Gearbox – PG1 and Getrag
Use OPEL B 0400063 for refill or topping-up.

Automatic Gearbox – JATCO
Use Texaco N402 fluid for refill or topping-up.

Intermediate Reduction Drive
Texaco S5 75W90; Synthetic oil or equivalent, 
meeting:  API GL5

Rear Differential
Multigear 80W/90 ETL; Specification:  API GL5

Gear linkage - Manual
Use grease containing 3% Molybdenum Disulphide.

General Greasing
Use Multipurpose Lithium Base Grease NLGI 
consistency No. 2.

Bonnet latch
Lubricate cable and latch with oil.

Sealants > < CAPACITIES, FLUIDS, LUBRICANTS AND SEALANTS|Fluids