Freelander Service Procedures
FUEL DELIVERY SYSTEM - PETROL
19-2-34 REPAIRS
Filler neck
$% 19.55.07
Remove
1. Disconnect battery earth lead.
2. Ensure fuel tank is less than half full. If not,
drain fuel tank to less than half full.
PETROL, ADJUSTMENTS, Fuel tank - drain.
3. Remove RH rear wheel arch liner.
4. Remove fuel filler cap.
CAUTION: Before disconnecting any part of
the fuel system, it is imperative that all dust,
dirt and debris is removed from around
components to prevent ingress of foreign
matter into fuel system.
5. Unclip escutcheon from fuel filler neck.
WARNING: Fuel vapour is highly flammable
and in confined spaces is also explosive
and toxic. Always have a fire extinguisher
containing foam, CO
2
, gas or powder close
at hand when handling or draining fuel.
6. Remove 3 nuts securing fuel filler neck to body.
7. Release clip from breather hose and
disconnect breather hose from filler neck.
8. Release fuel tank vent pipe from filler neck.
9. Disconnect Lucar connector from fuel filler
neck.
10. Remove bolt securing filler neck to body.
11. Remove tamper proof cover from filler hose clip
and loosen clip.
12. Disconnect hose from filler neck and remove
filler neck assembly.
Refit
1. Position filler neck assembly, connect to hose,
secure clip and fit tamper proof cover.
2. Fit bolt securing filler neck to body and tighten
to 9 Nm (7 lbf.ft).
3. Connect Lucar connector to fuel filler neck.
4. Position fuel tank vent pipe around filler neck.
5. Connect breather hose to filler neck, fit and
secure clip.
6. Fit nuts securing fuel filler neck to body and
tighten to 9 Nm (7 lbf.ft).
7. Clip escutcheon to fuel filler neck.
8. Fit fuel filler cap.
9. Fit RH rear wheel arch liner.
10. Connect battery earth lead.
M19 3230