Freelander Service Procedures
HOOD
REPAIRS
76-7-5
Glass - body side - hard back
$% 76.61.29
Always position trim components on a soft
covered, clean work surface.
Wear protective gloves when handling glass,
solvents and primers.
Wear suitable eye protection when removing and
refitting glass.
The following equipment is required: ```Cutting wire
and handles ```Sharp knife ```Windscreen repair kit
```Sealer applicator gun ```Suction cups
Remove
1. Remove hard-back.
cover - assembly - remove for access & refit.
2. Remove 2 screws securing 'E' post finisher,
release finisher from clips and remove finisher.
3. Remove 4 Torx screws securing hard-back
catches, slide catches from position and
remove catches.
4. Remove 3 Torx screws securing headlining
release headlining from hard-back seal and
remove headlining.
5. Cover interior of hard-back with protective
sheet.
6. Apply masking tape to protect paintwork.