Freelander Service Procedures
STEERING
57-26
REPAIRS
10. Using a broad round edged tool, carefully prise
horn switches from steering wheel.
11. Noting fitted position, disconnect 2 Lucars and
remove horn switch.
12. Repeat for other horn switch.
13. Disconnect multiplugs from cruise control (if
fitted) and radio control switches.
14. Release harness from clips and remove
harness.
15. Models with cruise control: Remove 2
screws securing cruise control switches to
steering wheel.
16. Models with cruise control: Remove cruise
control switches from steering wheel.
17. Remove 2 screws securing radio switches to
steering wheel.
18. Remove radio switches from steering wheel.
Refit
1. Fit radio switches to steering wheel and secure
with screws.
2. Models with cruise control: Fit cruise control
switches to steering wheel and secure with
screws.
3. Position harness to horn, cruise control (if
fitted) and radio switches and secure in clips.
4. Position horn switch and connect Lucars.
5. Repeat for other horn switch.
6. Connect multiplugs to cruise control and radio
control switches.
7. Td4 models: Position damper, fit and tighten
screws.
8. Remove tape from rotary coupler.
9. Ensure road wheels are in straight ahead
position and indicator cancelling cam is aligned
horizontally.
10. Fit steering wheel to column and ensure
spokes are horizontal.
11. Fit new self locking nut and tighten to 45 Nm
(33 lbf.ft).
12. Connect multiplug to rotary coupler.
13. Fit drivers airbag.
