Air conditioning
- Make
- Rover
- Model
- 800 Workshop Manual
- Year
- 1996–1999
- Section
- Repairs › Air conditioning
Engine - dieselAir conditioning
- Raise engine.
- Tighten timing cover upper 6 mm screws to 10 Nm.
- Tighten timing cover upper 8 mm screw to 25 Nm.
- Position engine mounting plate, fit and tighten bolts.
- Clean ancillary belt tensioner pivot.
- Position tensioner, fit washer and circlip.
- Align tensioner, fit and tighten top bolt.
Air conditioning
- Align compressor to bracket, position threaded plate, fit bolts and tighten to 25 Nm.
- Fit compressor support bracket bolts and tighten to 25 Nm.
- Clean jockey pulley centre bolt, fit jockey pulley and tighten centre bolt.
All models
- Lower engine.
- Fit crankshaft front oil seal. See this section.
Parts & tools for this job For 1996 Rover 800
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Rover 800 1996 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.