Handle - exterior - front door
- Make
- Land Rover
- Model
- Freelander Service Procedures
- Section
- REPAIRS › Handle - exterior - front door
DOORS
76-1-34 REPAIRS
Handle - exterior - front door
$% 76.58.07
Remove
1. Remove front door plastic sheet.
DOORS, REPAIRS, Plastic sheet -
2. Release clip securing latch control rod to door
latch and release rod.
3. Remove 3 Torx screws securing door latch,
lower latch and release door lock paddle.
4. Remove grommet to access screw.
5. Remove 2 door handle screw fixings.
6. Remove door handle.
7. Remove door latch control rod.
Refit
1. Fit door latch control rod to handle.
2. Position handle to door and tighten securing
screws.
3. Fit grommet to door.
4. Position latch, locate door lock paddle, fit and
tighten Torx screws.
5. Connect control rod to door latch.
6. Fit front door plastic sheet.
Parts & tools for this job For Land Rover Freelander
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Land Rover touch up paint
- PARTPanel clip assortmentSearch: Land Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.