Freelander Service Procedures
ENGINE - K SERIES KV6
OVERHAUL 12-3-81
Crankshaft rear oil seal
$% 12.21.20.01
Remove
1. Remove automatic gearbox.
REPAIRS, Gearbox - KV6 - with engine and
gearbox removed.
2. Assemble LRT-12-161 to LRT-12-199 and
secure with clamp bolt.
3. Position LRT-12-161 and LRT-12-199 to
crankshaft pulley to restrain crankshaft.
4. With assistance, remove and discard 6 bolts
securing drive plate to crankshaft.
5. Remove drive plate from crankshaft.
6. Remove and discard 5 bolts securing
crankshaft rear oil seal housing to cylinder
block.
7. Remove crankshaft rear oil seal.
Refit
1. Clean cylinder block face and oil seal running
surface on crankshaft, ensure bolt holes are
clean and dry.
2. Position oil seal protector, LRT-12-061 to
crankshaft.
3. Position oil seal to crankshaft.
CAUTION: Oil seal must be fitted dry.