Freelander Service Procedures
REAR AXLE & FINAL DRIVE
REPAIRS
51-3
Bush - differential mounting - front
$% 51.15.43
Remove
1. Remove LH mounting.
REPAIRS, Bush - differential mounting -
rear.
2. Remove 2 bolts securing RH mounting to
differential.
3. Remove 2 bolts securing front mounting to
differential.
4. Remove bolt securing front mounting
subframe.
5. Ease differential away from front mounting and
remove front mounting.
Refit
1. Ease differential away from front mounting and
fit front mounting.
2. Ensure differential is correctly located in LRT-
51-013.
3. Fit bolt securing mounting to subframe and
tighten to 120 Nm (89 lbf.ft).
4. Fit bolts securing front mounting to differential
and tighten to 65 Nm (48 lbf.ft).
5. Tighten RH mounting bolts to 65 Nm (48 lbf.ft).
6. Fit LH mounting.
