Freelander Service Procedures
REAR AXLE & FINAL DRIVE
51-4
REPAIRS
Bush - differential mounting - rear
$% 51.15.44
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Position centralising jig LRT-51-013 to align
differential assembly.
3. Remove bolt securing differential mounting to
subframe.
4. Remove 2 bolts securing mounting to
differential.
5. Remove mounting.
Refit
1. Position differential mounting.
2. Fit bolts securing mounting to differential and
tighten to 65 Nm (48 lbf.ft).
3. Fit bolt securing mounting to subframe and
tighten to 120 Nm (89 lbf.ft).
4. Remove LRT-51-013.
5. Remove stands and lower vehicle.