landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Cover - rear seat cushion - RH|Page 840 > < Cover - one piece - front seat cushion
Page 699
background image

SEATS

76-5-4

REPAIRS

12. Remove 12 hog rings securing cover to 

cushion.

13. Remove cushion cover from cushion.

Refit

1. Position cushion cover to cushion pad and 

secure to frame with hog rings in position noted 
during removal.

2. Position and secure cushion cover and pad to 

frame.

3. Fit squab frame to cushion frame and tighten 

Torx bolts to 45 Nm (33 lbf.ft).

4. Connect multiplugs.
5. Position multiplug to frame and secure clips.
6. Fit recline control knob.
7. Fit side covers and secure retaining studs.
8. Fit front seat.

 

 + 

 SEATS, REPAIRS, Front seat.

Cover - rear seat cushion - RH  

$% 78.40.04

Remove

1. Remove RH rear seats.

 

 + 

 SEATS, REPAIRS, Rear seat - RH.

2. Remove 2 screws and remove seat belt reel 

cover.

3. Remove nut and release seat belt reel.

Cover - rear seat cushion - RH|Page 840 > < Cover - one piece - front seat cushion