Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)14 · Suspension
14 · Steering & suspension

Front damper

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Repairs › Front damper
SuspensionFront damper

Refit

  1. Fit rebound rubber to subframe and tighten screw.
  2. Secure ABS sensor lead in bracket.
  3. Place trolley jack under hub and raise suspension.
  4. Remove wedge, lower suspension, and remove trolley jack.
  5. Fit road wheel(s) and tighten nuts to correct torque. See INFORMATION, Torque wrench settings.
  6. Remove stand(s) and lower vehicle.

FRONT DAMPER

Service repair no - 68.15.16

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Remove road wheel(s).
Front damper – Remove road wheel(s).
  1. Remove nut securing damper to front wing valance.
  2. Remove rubber bush and washer.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.