Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition16 · Body
16 · Body & interior

Replacement

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Doors › Replacement
BodyReplacement · page 1 of 3

Replacement

Diagram showing bolts and guide on a glass regulator assembly with dimension 6 x 1.0 mm (6 Nm)

A Bolts

B Guide

  1. Remove:
    • Door panel
    • Plastic cover
  2. Carefully move the glass until you can see the bolts, then loosen them.
  3. Slide the guide to the rear, then remove the glass.
Diagram of door interior showing glass stopper and window aperture

A Glass

B Stopper

  1. Carefully pull the glass out through the window aperture.

Note: Take care not to drop the glass inside the door.

Front channel

  1. Remove the speaker and cover panel.
  2. Peel the glass run channel out of the front and centre channels.
Diagram of front channel removal showing cover panel, speaker, glass run channel, and front channel with dimensions 6 x 1.0 mm (8 Nm)

A Cover panel

B Speaker

C Glass run channel

D Front channel

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.