Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition16 · Body
16 · Body & interior

Front Bumper Replacement (page 2 of 4)

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Exterior fittings
BodyFront Bumper Replacement · page 2 of 4
  1. Open the bonnet.
  2. Remove clips from locations shown by white triangles.
  3. Remove screws and bolts from locations shown by black triangles.
  4. Remove main bumper mounting nuts from engine compartment locations shown by black circles.

Note:

  • Use an assistant when removing and refitting the front bumper.
  • Take care not to scratch the front bumper.
  • If necessary, replace the front bumper beams.
  1. Installation is the reverse of the removal procedure.

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.